Why Sharp Corners Are Dangerous in Mechanical Parts

A sharp internal corner looks simple in CAD.

From a mechanical design point of view, it can be one of the most important features on the entire part.

The reason is stress concentration.

## What happens at a sharp corner?

When a load passes through a component, stress is not always distributed evenly.

A sudden change in geometry can concentrate stress around a small region.

Common examples include:

– Sharp internal corners – Holes – Keyways – Grooves – Threads – Notches – Abrupt section changes

## The simple fix: a fillet

A radius can smooth the load path and reduce local stress concentration.

But the radius should not be chosen blindly.

It must also consider:

– Manufacturing process – Tool diameter – Mating parts – Clearance – Material – Fatigue requirements

## Why fatigue makes it more important

A component under repeated loading can be much more sensitive to local stress concentration than one under a single static load.

A part may survive one high load and still fail after many cycles.

That is why small geometry details can have a large effect on fatigue life.

## What FEA can and cannot tell you

FEA is useful for identifying high-stress regions and comparing design changes.

But a perfectly sharp theoretical corner can also create a very high or mathematically problematic local result.

The model should represent the real manufactured geometry.

Do not simply stare at the maximum colour on a stress plot.

Ask whether the geometry, mesh, loads and boundary conditions represent the real part.

## A practical design habit

Whenever you create an internal corner, ask:

“Does this corner need to be sharp?”

If not, add a realistic radius.

Then check whether the radius can actually be manufactured.

## Design is about load paths

A strong mechanical design often looks simple because the geometry has been arranged so that forces flow smoothly through the component.

That is one of the biggest differences between “I can model it” and “I can design it.”

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top